13.
Make sure that all parts are properly tightened before you use the treadmill.
If there are sheets of plastic
on the treadmill decals, remove the plastic. To protect the floor or carpet, place a mat under the treadmill.
Note: Extra hardware may be included. Keep the included hex key in a secure place; the hex key is used to
adjust the walking belt (see pages 23 and 24).
12. Raise the Frame (60) to the position shown.
Have a second person hold the Frame until
this step is completed.
Orient the Storage Latch (61) so that the large
barrel and the latch knob are oriented as shown.
Attach the upper end of the Storage Latch (61)
to the bracket on the Frame (60) with a 3/8" x
1 3/4" Patch Bolt (6) and a 3/8" Nut (10).
Attach the lower end of the Storage Latch (61) to
the Base (94) with a 3/8" x 2" Bolt (3) and a 3/8"
Nut (10). Note: It may be necessary to move the
Frame (60) back and forth to align the Storage
Latch with the Base.
Lower the Frame (60) (see HOW TO LOWER
THE TREADMILL FOR USE on page 21).
12
61
10
60
6
10
3
94
11. Firmly tighten the four 3/8" x 1" Patch Bolts (4)
(only one side is shown). Then, firmly tighten the
three 3/8" x 2 3/4" Patch Bolts (7).
Slide the Upright Cover (87) down against the
Base (94).
Press the Right Base Cover (84) and the Left
Base Cover (not shown) onto the Base (94).
11
94
87
84
4
7
Large
Barrel
Latch
Knob
12
