7
4.
Tip: Do not damage the wires inside the Seat
Handlebar (11) during this step.
Attach the Seat Handlebar (11) to the Seat
Carriage (41) with two M8 x 68mm Button Bolts
(70), two M8 Curved Washers (86), and two M8
Locknuts (99).
Make sure that the Locknuts
are in the hexagonal holes in the Seat
Carriage.
Then, plug the Lower Pulse Wire (58) into the
Seat Handlebar (11) and the receptacle in the
Right Shield (14).
See step 3. Tighten the two M8 x 35mm
Button Bolts (72).
4
11
70
86
86
41
99
58
14
99
5. Attach the Book Holder (3) to the Backrest
Tubes (52) with two M4 x 19mm Tek Screws
(75).
Then, attach the Book Holder (3) to the
Backrest (8) with two M4 x 38mm Screws (89).
5
89
75
8
3
52
