13
16.
Make sure that all parts of the elliptical exerciser are properly tightened.
Note: An extra grease packet
and some hardware may be left over after assembly is completed. To protect the floor or carpet from dam-
age, place a mat under the elliptical exerciser.
24
25
15. Orient the Front Upright Cover (24) as shown.
Attach the Front Upright Cover (24) around the
Upright (5) by pressing the tabs on the Front
Upright Cover into the Rear Upright Cover (25).
14. Insert the excess wire downward into the
Upright (5).
Tip: Avoid pinching the wires.
Attach the
Console (33) to the Upright (5) with four M4 x
16mm Screws (106).
Tip: Tighten the two
indicated Screws first and then tighten the
other two Screws.
5
33
106
5
Avoid pinching
the wires
14
15
Tighten
first
Summary of Contents for SFEL16009.0
Page 26: ...26 NOTES...
