background image

18

HOW TO USE AN IFIT CARD

1. Insert the key into the console.

See step 1 on page 14.

2. Insert an iFit card and select a workout.

To use an iFit workout, insert an iFit card into the

iFit slot; make sure that the iFit card is oriented so

the metal contacts are face-down and are inserted

into the iFit slot.

Next, select an iFit workout by pressing the iFit in-

crease or decrease button. When an iFit workout is

selected, the display will show a trail on the side of

a mountain. In addition, the display will show the

name, maximum incline setting, duration, and max-

imum speed setting of the workout.

Each iFit workout is divided into several one-

minute segments. One speed setting and one in-

cline setting are programmed for each segment.

Note: The same speed and/or incline setting may

be programmed for consecutive segments.

3. Start the walking belt.

Press the Start button to start the workout. A mo-

ment after you press the button, the incline trainer

will automatically adjust to the first speed and in-

cline settings of the workout. Hold the handrails

and begin walking.

During the workout, the voice of a personal trainer

will guide you through the workout. The iFit work-

out will function in the same way as a random

workout (see step 3 on page 17).

If the speed or incline setting for the current seg-

ment is too high or too low, you can override the

setting by pressing the Speed or Incline buttons;

however, when the next segment begins, the

incline trainer will automatically adjust to the

speed and incline settings for the next seg-

ment.

To stop the workout at any time, press the Stop

button. To restart the workout, press the Start but-

ton. The walking belt will begin to move. When the

next segment of the workout begins, the incline

trainer will automatically adjust to the speed and in-

cline settings for the next segment.

4. Monitor your progress with the display.

When an iFit workout is selected, the console of-

fers three display modes. Press the Display Mode

button repeatedly to select the desired display

mode. The display can show the time remaining in

the workout, the distance you have walked or run,

the speed of the walking belt, the incline of the in-

cline trainer, the approximate number of calories

burned per hour, the number of vertical feet you

have climbed, and the approximate number of

calories you have burned.

Press the Display Zoom increase and decrease

buttons to zoom in or zoom out.

5. Turn on the fan if desired.

See step 7 on page 15.

6. When you are finished exercising, remove the

key from the console.

See step 8 on page 15.

CAUTION: Always remove iFit cards from the

iFit slot when you are not using them.

iFit Slot

iFit Card

Summary of Contents for INCLINE TRAINER X3 INTERACTIVE

































Reviews: