10
CABLE GUARDS
Check for alignment periodically to ensure that guards
are not dragging on the cable and that they are per-
forming their intended duty. If the alignment is not
proper, loosen the bolt slightly and readjust as neces-
sary.
Correct Alignment
Incorrect Alignment
Rubbing
Contacts
Cable
Out of
Alignment
Guards
Guards
Cable
Cable
Pulley
ADJUSTMENT KNOB
If an adjustment knob sticks, it will need to be relubri-
cated. Disassemble the knob and apply a light coat-
ing of lithium grease. Reassemble the knob as shown
in the diagram. If the adjustment knob still does not
function properly, the spring may need to be replaced.
To order a new spring, refer to ORDERING
REPLACEMENT PARTS on the back cover of this
manual.
Adjustment Knob Diagram
Adjustment
Pin
Spring
Housing
Knob
