6
MAINTENANCE
DAILY MAINTENANCE
Upholstery and Frame—General Cleaning
1. Clean the strength equipment using a soft cloth
dampened with a light solution of mild soap and
warm water. If necessary, use a soft bristle brush
with the cleaning solution.
2. Rinse the area thoroughly using a soft cloth damp-
ened with clean water. Dry thoroughly.
Upholstery—Difficult Stains
1. Spray the stain with a non-abrasive household
cleaner such as FORMULA 409
®
cleaner, SIMPLE
GREEN
®
, or a similar product. Rub the stained
area gently and let the cleaning solution sit for a
few minutes.
2. Rinse the area thoroughly using a soft cloth damp-
ened with clean water. Dry thoroughly.
3. Repeat these steps if necessary using a soft bristle
brush.
Optional Method for Difficult Stains
1. Rub the stained area gently using a soft cloth
dampened with rubbing alcohol.
2. Rinse the area thoroughly using a soft cloth damp-
ened with clean water. Dry thoroughly.
CAUTION:
When using any cleaning product, try it
first in an unnoticeable place to ensure that there is
no damage to the material. Follow the directions
and the safety precautions of the manufacturer of
each cleaning product used. FreeMotion Fitness
and its vendors cannot be held liable for damage or
injuries resulting from the use or misuse of cleaning
products.
Important:
Do not use abrasive cleaners,
which may scratch the strength equipment. Strong
cleaners and abrasives will damage decals; use
caution around decals. Do not use solvents such as
lacquer thinner, kerosene, gasoline, or similar liq-
uids.
WEEKLY MAINTENANCE
Hardware
1. Check all nuts and bolts and tighten them as
required.
2. Check the wheels to make sure that they roll easily.
Tighten or replace the wheels as needed.
Important:
All FREEMOTION EPIC cushions have
dense plywood supports with tee-nuts that are used to
bolt the cushions to the strength equipment. Because
the tee-nuts are held by the plywood, they will not
withstand the torque that standard nuts and bolts will.
When tightening the bolts securing a cushion, turn
them only until they are snug and the cushion does
not move or feel loose. Overtightening may strip the
tee-nuts from the plywood and make it impossible to
remove the cushion in the future.
For optimal performance of the strength equipment and to reduce the chances of injury to users, you must per-
form preventive maintenance on a regular basis. Instruct all personnel to perform the procedures described in
this section. Personnel must also record and report any accident. To maintain the strength equipmentʼs warran-
ty, use only FREEMOTION EPIC parts for repair or replacement. If there are any questions or concerns, see
HOW TO CONTACT CUSTOMER CARE on the back cover of this manual.
