Freemotion GZFW2021.4, Owner'S Manual

Page: 5 / 12

5
1. Attach the Left Arm (2) to the Base (1) with two
1/2" x 1" Bolts (9) and two 1/2" Washers (12).
Attach the Right Arm (14) in the same manner.
2. Identify the Left Upright (13) and the Right
Upright (not shown).
Note: The racks are offset
toward the outer sides of the Uprights.
Attach the Left Upright (13) to the Left Arm (2)
with four 1/2" x 3 1/2" Button Head Bolts (15).
Do
not tighten the Button Head Bolts yet.
Attach the Right Upright (not shown) to the
Right Arm (not shown) in the same manner.
Make sure that the racks are aligned, and
tighten the eight 1/2" x 3 1/2" Button Head
Bolts (15).
Before beginning assembly, carefully read the
following information and instructions:
•
Assembly requires two persons.
•
Place all parts in a cleared area and remove the
packing materials. Do not dispose of the packing
materials until assembly is completed.
• Tighten all parts as you assemble them, unless
instructed to do otherwise.
• As you assemble the strength equipment, make
sure that all parts are oriented as shown in the
drawings.
The following tools (not included) are required
for assembly:
• One adjustable wrench
• One hex key
Assembly will be more convenient if you have a
socket set, a set of open-end or closed-end
wrenches, or a set of ratchet wrenches.
Make Assembly Easier
Everything in this manual is designed to ensure
that the strength equipment can be assembled
successfully by most people. Setting aside plen-
ty of time will help assembly go smoothly.
ASSEMBLY
1
1
2
12
9
14
2
2
13
Rack
Outer
Side
15