7
MAINTENANCE
It is important for safe and trouble-free operation of your FREEMOTION strength equipment to perform preven-
tive maintenance on a regular basis. Instruct all personnel to perform equipment inspection and maintenance
requirements, and to record and report any accident. To maintain the strength equipment’s warranty, use only
FREEMOTION parts for repair or replacement. If there are any questions or concerns, see HOW TO CONTACT
CUSTOMER CARE on the back cover of this manual.
SCHEDULED MAINTENANCE
DAILY
1. Upholstery—General cleaning:
• Wipe using a soft cloth dampened with a light
solution of mild soap and warm water.
• If necessary, use a soft bristle brush with the
cleaning solution.
• Rinse thoroughly using a soft cloth dampened
with clean water and dry thoroughly.
2. Upholstery—Difficult stains:
• Spray the stain with a non-abrasive household
cleaner such as FORMULA 409
®
cleaner,
SIMPLE GREEN
®
, or a similar product.
• Rub the area gently and let it sit for a few min-
utes.
• Rinse thoroughly using a soft cloth dampened
with clean water and dry thoroughly.
• Repeat if necessary using a soft bristle brush.
Optional method for difficult stains:
• Rub the area gently using a soft cloth damp-
ened with rubbing alcohol.
• Rinse thoroughly using a soft cloth dampened
with clean water and dry thoroughly.
CAUTION:
When using any cleaning product, try
it first in an inconspicuous place to ensure that
there is no damage to the material. Follow the
directions and adhere to the safety precautions of
the manufacturer of each cleaning product used.
FreeMotion Fitness and its vendors cannot be
held liable for damage or injuries resulting from
the use or misuse of cleaning products.
3. Towers and Frames:
• Wipe using a soft cloth dampened with a light
solution of mild soap and warm water. Rinse
thoroughly using a soft cloth dampened with
clean water and dry thoroughly.
Important:
Do not use abrasive cleaners
because they may scratch the equipment. Strong
cleaners and abrasives will damage decals. Use
caution around decals. Do not use solvents such
as lacquer thinner, kerosene, gasoline, or similar
liquids.
4. Stainless Steel Covers:
• Wipe with a light solution of mild soap and warm
water. Rinse and dry thoroughly.
• If desired, or to remove corrosion, use available
commercial stainless steel polishing com-
pounds. Follow manufacturers’ instructions.
5. Handles/Heel Strap:
• Check all straps for wear.
• Visually check each strap along the full length
for signs of wear such as cuts, tears, or nicks.
Replace the strap immediately if necessary.
• A “fuzz” will appear on straps over time and is
not a concern unless it appears to be worn
through strands of the weave.
6. Straps with Rings:
• If a ring is pulling through the strap or tearing
away from the edge of the strap, replace the
strap immediately.
• Check stitching points on straps for tears, worn
spots, or separation. Replace the strap immedi-
ately if necessary.
Summary of Contents for GZFM6006.6
Page 11: ...11 NOTES...
Page 12: ...12 NOTES...