7
2. Insert the end of the Upright Wire (111) through
the indicated holes in the Upright (81), and then
through the looped plastic ties at the top of the
Upright.
Make sure that the Upright Wire is on
the outside of the Upright.
Then, gently pull
upward on the Upright Wire as you tighten the
plastic ties around the Upright Wire.
111
2
1.
Make sure that
the Power Cord
(not shown) is un-
plugged. Be care-
ful not to pinch
the Power Cord.
Slide the Upright Cover (not shown) off the
Upright (81).
Orient the Upright (81) with the plastic ties and
the “Right” sticker on the side shown. Set the
Upright on the tabs on the Frame (53). Attach
the Upright to the Frame with six 3/8" x 3 1/4"
Patch Bolts (1) and six 3/8" Flat Washers (41).
Start all six Patch Bolts before tightening
any of them. Be careful not to pinch the
Upright Wire (111).
81
53
111
1
41
41
41
41
Plastic
Ties
Holes
81
Plastic Ties
1
!
!
Tabs
“Right”
1
1
1
