11
HOW TO UPGRADE THE CONSOLE
Your console has been preconfigured to operate with an optional digital TV.
To learn about the features of the basic console, see page 15. To learn about the features of the digital
TV, see the user’s manual included with the digital TV. The basic console has no television capabilities.
To upgrade your console to include a digital TV whenever you choose, please see the back cover of this manual.
11. Make sure that all parts are properly tightened before you use the elliptical. Extra parts may be included.
Place a mat beneath the elliptical to protect the floor.
If you purchased the optional MYE receiver to set up a wall of TVs, go to step 10 to install the receiver.
If you did not purchase the optional MYE receiver, go to step 11. To order the optional MYE receiver, see
the back cover of this manual.
10. Using a standard screwdriver, remove the
Console Cover Cap (45) from the Left and Right
Upright Covers (46, 47) on the back of the
Console (3).
Locate the coupler (C) that has a wire labeled
“In” (D) and a wire labeled “Out” (E).
See the inset drawing. Unplug the wire labeled
"In" (D) and the wire labeled "Out" (E) from the
coupler (C), and discard the coupler.
Then, plug the wire labeled “In” (D) into the
“In” port on the receiver (F), and plug the wire
labeled “Out” (E) into the “Out” port on the
receiver.
Next, peel the backing (G) off the receiver (F),
and press the receiver onto the Upright (2) inside
the Left and Right Upright Covers (46, 47). Then,
reattach the Console Cover Cap (45).
Follow the instructions included with the
MYE programmer to program the receiver.
IN
OUT
IN
OUT
10
D
E
E
C
F
45
46, 47
G
3
C
2
D
Summary of Contents for e8.9b
Page 26: ...26 NOTES ...
