Freemotion EPIC GZFW2141.3, Owner'S Manual

Page: 5 / 12

This section explains how to adjust the strength equipment for exercising. Make sure all parts are properly tight-
ened each time the strength equipment is used. Replace any worn parts immediately.
5
ADJUSTING THE SEAT
To raise the seat, release the seat lock by lifting the
front end of the seat. Slide the seat to the desired
position and lower the end of the seat. Make sure
the seat lock reengages in the new position.
To lower the seat, release the seat lock by lifting the
front end of the seat. Push down on the seat near the
frame to slide it to the desired height. Lower the front
end of the seat. Make sure the seat lock reengages
in the new position.
Rack
Long
Storage
Bar
Short
Storage
Bar
Seat
Frame
Lift this
end
ADJUSTMENTS
STORING WEIGHT
Store unused weights on the storage bars. Note: The
diagram shows the suggested location for storing
weights.
25-lb.
weights
35- and 45-lb.
weights
5- and 10-lb.
weights
WARNING:
Each long storage bar
can hold up to 150 pounds. Each short storage
bar can hold up to 225 pounds. Do not place
more than a total of 600 pounds, including the
barbell (not included), on the racks and stor-
age bars. Always place an equal amount of
weight on each side of your barbell.