11
CABLE DIAGRAM
The cable diagram shows the proper route of the
cable. Use the diagram to make sure that the cable
and the cable guards have been assembled correctly.
If the cable has not been correctly routed, the
strength equipment will not function properly and
damage may occur. The numbers show the correct
route of the cable.
Make sure that the cable guards
do not touch or bind the cable.
Cable (39)
4
1
3
6
5
7
2
This section explains how to adjust the strength equipment. Make sure all parts are properly tightened each time
the strength equipment is used. Replace any worn parts immediately.
6
ADJUSTING THE RESISTANCE
To change the amount of resistance for your workout,
insert the weight pin into the desired weight. Make
sure that the weight pin is fully inserted into the
weight.
ADJUSTMENTS
Weight
Weight
Pin
ADJUSTING THE SEAT
To raise the seat, lift on the end of the seat and move
the seat to the desired position. To lower the seat, lift
on the end of the seat and press down on the back of
the seat until the seat is at the desired height.
Lift
Press
Seat
ADJUSTING THE ARMS
To change the position of each arm, pull the arm knob
down and move the arm to the desired position.
Reengage the arm knob into the selector bracket on
the bottom of the cam.
CAM
Arm Knob
Arm
