Sanitize Parts
Disassemble and clean Freemie prior to first use. Some parts must be boiled initially.
Unsnap cup from funnel
Pull valve base off funnel
Remove valve from
valve base
Boil these parts
for 10 minutes
to sanitize
Do NOT boil
these parts
• Do not let parts sit on the bottom of the boiling pot.
Parts should float freely.
• Remove from water and allow to dry completely.
Parts must be thoroughly dry before use.
• Hand wash valve in hot, soapy water and rinse.
Allow parts to cool and dry completely before use.
Do not boil or steam sterilize tubing, valves,
or connectors.
• Quick Connector can be washed by hand when necessary.
Preparing Freemie for First Use
4