Freeman Matt Gun II, Instruction Manual & User Manual

Page: 9 / 28

7
During Use
• Push
Plunger
to extrude wax. Do not use excessive force.
• Press the Power Button to turn off gun. Keep gun upright
with
Kickstand
fully extended until completely cooled.
Do not leave gun on side during use or while warm.
• The
Temp. Display
will blink to indicate automatic shutoff
feature has been activated after 1 hour of use.
Press the
Power Button
to turn gun back on.
Loading Wax
• Extend Plunger completely.
• Insert Wax Pellet of your choice into the Loading Chamber .
• See pages 10-14 for pellet-specific temperature recommendations.
Setting Temperature
• Plug in the gun and press the Power Button .
• Toggle through temperatures by pressing the Temp. Button .
Temperatures range from 250°-295° F (120°-147° C)
in 5°F (3°C) increments.
• The Heating Indicator Light will blink while heating
and will remain lit when the gun is ready to use.