19
WWW.FREEFLYSYSTEMS.COM
| SETUP GUIDE
TOP MOUNT
1.
Adjust battery stops to fit battery pack(s)
2.
Attach the single-hole end of the battery retention
strap to a stud on the landing gear
3.
Place battery packs(s) in landing gear
4.
Tension and secure battery retention straps
WARNING
Always secure battery packs with both battery retention straps.
CAUTION
When plugging in battery packs, ensure the polarity is
correct. Positive is indicated by a red power lead, and
negative/ground is indicated by a black power lead.
Reversing polarity will damage ALTA’s electronics.
CAUTION
When installing two battery packs, ensure they are at a similar
state of charge (a full pack voltage difference less than 0.5V).
Plugging in two dissimilarly charged packs could cause one pack
to rapidly discharge into the other and damage the batteries or
cause a battery fire.
CAUTION
When using two battery packs, only use packs that are
identical in their capacity and at a similar condition. Using
a pack with another that is larger, or has many more
cycles, can damage the battery packs.
1
2
3–4