Quick Install Guide
freeGuard
Capture 750
Revision 1.0 Specifications are subject to change without notice. Copyright 2008 Freedom9 Inc.
freedom to succeed
Method 2 (Sniffer Mode)
Depending on your switch type you may need to consult
your user manual. Enable port mirroring for the port
connected to your router or firewall. Connect the
“WAN” port of the freeGuard Capture 750 to the
mirrored port. Connect the “LAN” port of the freeGuard
Capture 750 to the same switch (non-mirrored port).
(see sample setup diagram)
C. BRIDGE OR SNIFFER MODES
(Cont)
:
www.freedom9.com
1-888-998-9189
Page 2
Bridge Mode Sample Setup Diagram:
Sniffer Mode Sample Setup Diagram:
D. POWER UP THE DEVICE:
Turn on the unit.
Access the device once it has booted fully with the IP
address you assigned.
