INSTALLATION INSTRUCTIONS
SCS-090090-PWS
Contour Shower Shelf
Page 4
of 4
Step #2
Fill the clearance holes on the mounting surface with silicone to ensure a water-tight seal will be created
at all mounting locations. Secure the Shelf Mounting Bracket to the wall using the (4) #10 Pan Head Phillips
sheet metal screws (provided) and screw into the solid wood backing.
Do
NOT
tighten screws completely until ALL (4) screws are in place.
To ensure proper and safe installation, the shower shelf should not shift in any direction on the mounting surface.
Do NOT exceed 50 pounds of force in use of this product.
Hardware Provided:
(4) #10 Pan Head Phillips sheet metal screws 2” length.
Tools required:
Marking pencil/pen, level
,
masking tape, power drill, 1/8” and 3/16” Masonry or Carbide drill bits,
silicone.
THIS COMPLETES THE INSTALLATION OF THIS SHOWER SHELF.
