INSTALLATION INSTRUCTIONS
Silhouette Comfort Plus
Tub/Shower Seat
LIFESTYLE & WELLNESS
®
LIFESTYLE & WELLNESS®
Patent Pending
Page 2
of 6
2.
Locating the Silhouette Comfort Plus Seat in the desired position for Walk-in Showers and Tub Enclosures.
Diagram 1
Walk-in Shower
Diagram 2
Tub Enclosure
Remove the seat from the carton and unfold
the seat so it is in the open position with
Swing Down Legs in the full
“DOWN”
position and the Telescoping Leg Push-Pins
fully engaged, preventing movement of the
Swing Down Legs. (See Diagram 5)
Locate
the area with 2” solid wood in
-wall
backing. Determine desired seat height
(ADA requirements stipulate a seat height of
17” –
19”
from the floor). Place seat at
desired location and make sure the
mounting brackets are flush against the wall.
(See Diagram 1 & 2)
Align mounting hole centerlines with the
in-wall backing. Using a level (not provided)
ensure the seat top is level. (See Diagram 3)
When installing the seat in a tub enclosure,
place the seat in the open position with
Swing Down Legs in the full
“DOWN”
position (as shown in Diagram 2) against the
wall, prior to installation, to ensure the
bottom of the seat will clear the tub dam
and that the Leveling Feet will rest securely
on the tub floor. (See Step 5
–
Adjusting the
height on the Swing Down Legs)
Using a pencil or suitable marker, it is
extremely important
you mark the center of
each of the four (4) mounting holes precisely
on the mounting surface. (See Diagram 3)
