Freedom Scientific TOPAZ XL HD, User Manual, Page: 45 / 48

3
Saving User Settings with Configuration Menu
Configuring multiple visual and product settings is a two-step process. First, you must select
and save TOPAZ XL preferences using the Configuration menu. Next, you can select your
favorite color combination and then save all changes as your default user settings.
1. Press and hold the red Focus Lock button for at least 10 seconds to open the
Configuration menu. The color mode option ( or ) displays on the screen.
2. Press the red Focus Lock button to scroll through the different menu options.
For a list of new options added, see New Options in the TOPAZ XL Configuration Menu
on page 1.
3. When an option that you want to change displays, press the center of the black
Magnification dial to enable ( ), disable ( ), or cycle through different option
settings.
Refer to your TOPAZ XL
user’s guide for details to add and assign color mode
positions.
Important:
The Home option resets the unit to your default user settings every time you
turn it on. Home is disabled by default. To enable Home, make sure to select it
while in the Configuration menu.
4. Press the red Focus Lock button again to advance to the next option.
5. When finished, press and hold the red Focus Lock button for at least 10 seconds to
save and exit the Configuration menu.
6. The next step is to select and save a color mode as described in the next section.
Setting Up and Saving Default Colors
If you save your settings as the default settings, you can easily recover them later. If you
enabled the Home option in the Configuration menu, saving your settings will allow TOPAZ XL
to revert to them every time the unit is turned on.
1. Turn the blue Color Select dial to move from one color mode to the next.
If necessary, turn the yellow Brightness dial to adjust brightness for the current color
mode displayed on the screen. Repeat this step as needed.
2. After setting all brightness levels, turn the blue Color Select dial to select and display
the color mode you want the unit to start with every time you turn on TOPAZ XL.