8
Note:
Disconnect the Focus display from your computer when performing the
following steps. Having the display connected during this process
results in improper installation and failure of the display to operate
properly.
1.
Insert the Focus Blue Companion CD. When the Freedom Scientific
Focus Setup dialog box opens, choose Install Windows driver. You will
hear a series of clicks as the driver is installed.
2.
When the installation completes, choose the OK button to restart your
computer.
Configuring the USB Connection
To configure the Focus Blue braille display to operate with JAWS over USB, do
the following:
Note:
If you are using a third-party screen reading application, refer to the
documentation that came with the software as this procedure might be
different.
1.
Establish a USB connection between the Focus and computer using
the supplied USB cable.
2.
Windows will detect the display and install the appropriate drivers.
3.
Once Windows has confirmed that the hardware was successfully
installed, close and then restart JAWS. JAWS automatically detects
and begins using your Focus Blue braille display.
Configuring the Bluetooth Connection
In order to use the Focus Blue wirelessly over Bluetooth, you must first
configure a Bluetooth partnership between the Focus and computer.
To set up a Bluetooth partnership between the Focus display and computer, do
the following:
1.
Make sure that Bluetooth is enabled on the computer running JAWS. If
you are using an external USB Bluetooth adapter, insert it and ensure
it is detected properly.
2.
Power on the Focus. The time and battery status information is
displayed.
