3
ONYX PRO Setup
Inserting and Removing the Tablet
Note:
You must provide a Surface Pro 7 tablet to use with the ONYX PRO.
Before inserting or removing a tablet ensure that the main camera,
Surface Pro charger, USB devices, and headphones are unplugged
from the tablet.
Place the ONYX PRO on a flat surface and open the stand.
To insert the tablet in the stand, do the following:
1. Make sure you are holding the tablet so that the Power and Volume buttons
are located on the top left side of the tablet.
2. Insert the right side of the tablet into the right side of the stand.
3. Gently push the left arm of the stand outwards, and then push the left side
of the tablet in until it locks into place on the left arm.
