SCHEDULED MAINTENANCE
11
SCHEDULED MAINTENANCE
Scheduled Maintenance Plan
Power Hatch System
•
Check proper hatch operation.
Adjust hatch and/or limit switch as
necessary.
Ramp System
•
Inspect ramp mechanism for loose
fittings, alignment, and abnormal
wear.
•
Clean and lubricate ramp drive
mechanisms.
•
Inspect and clean ramp and limit
switch.
INSPECTION ITEM
INSPECTION CRITERIA
INSPECTION FREQUENCY
Bushing on all hinge points
Clean and check for any wear, out of
round bushing ID, rust, unusual noise
or motion.
Monthly by operator and
biannually by local authorized
dealer.
Mechanical linkages and ramp
beams
Check for any signs of mechanical
damage, missing components,
excessive rust or loose fasteners.
Monthly by operator and
biannually by local authorized
dealer.
Electrical wiring
Corrosion at connection points, wear
or chafing of insulation, pinched or cut
wires. Routing to avoid any potential
damage.
Monthly by operator and
biannually by local authorized
dealer.
Hydraulic cylinders, pump, and
manifold - USE AUTOMATIC
TRANSMISSION FLUID ONLY
Check for proper fluid level tank (DO
NOT TOP OFF WITH CYLINDERS
EXTENDED, MAY CAUSE
OVERFLOW), leaks, damage, abrasion
or abnormal wear.
Monthly by operator and
biannually by local authorized
dealer.
Hydraulic hoses and abrasive
jacket
Any abrasion, wear or damage.
Routing to avoid any potential
damage.
Monthly by operator and
biannually by local authorized
dealer.
Undercarriage
Damage and excessive rust, reapply
rust prevention as necessary.
Biannually by local authorized
dealer.
Tire damage, wear and
pressure
Check for any signs of damage,
uneven wear, and proper inflation.
Monthly by operator.
Battery
OEM recommendations
Monthly by operator.
