background image

 

 

Freedom Designs, Inc. 

                                                      

Gizmo

 

40 

Cleaning  

 
It is important, for optimum performance, to 
clean and maintain your 

Gizmo

We 

recommend that the frame finish be cleaned 
with mild soap and water. 
 

Maintenance

 

 
1. In order to operate the 

Gizmo 

properly 

and safely, routine maintenance will extend  
the life and efficiency of your wheelchair.  

 

Safety Inspection Checklist 
 

Follow these maintenance procedures for the 
optimum performance of your 

Gizmo

 

wheelchair. 
 
1. Check to see that the wheelchair rolls 

straight. 

2.  Tires: Check for flat spots, wear and proper 

inflation. 

3. Wheel lock: 
 

a. Check to see that the lock engages 

 easily. 
 

b.  Check that the locks are free of wear 

 

c. Check to see that the locks do not 

 

interfere with the tires when rolling. 

4.  Ensure that all fasteners are secure. 
5.  Casters: Inspect axle for proper tension. 

Spin the caster. The caster should come to 
a gradual stop. 

 

Storage 

 

 
The 

Gizmo

 

folds down to a small unit. We 

suggest when storing the wheelchair, that it be 
stored indoors, in a cool and dry area.

 

 

 

 

Summary of Contents for Gizmo Folding Tilt

















































Reviews: