20
FREECOM Traveller II Series
GB
5
Should your computer cause problems when you attempt to install software,
do not use any memory manager such as QEMM
disable the systems Power Management.
check if all the requirements contained in the instructions on the disk have
been fulfilled.
check if the FREECOM device is properly connected to the Cable II
check if the drive is being supplied with power when you boot your system
If audio playback does not work, please check if
the loudspeaker is properly connected
the Cable II are firmly connected
the loudspeaker control on the amplifier or on the active loudspeakers is
correctly set
the audio software is correctly installed
Note: Please note that CD-RW drives (FREECOM Traveller CD-RW / Combo
CD-RW / DVD) must never be cleaned with a lens cleaning set!
In addition, for the parallel port
Use a slower transmission mode (EPP)
If possible, switch the parallel port to another mode or to another address.
Check if the Cable II is plugged in correctly. The Cable II must not be too loose.
If the printer is not working correctly, please check if
the printer has been properly connected
the FREECOM System was switched on
the printer software is set to unidirectional communication
Note: When installing a printer for the first time under Windows 95/98 and
DOS/Windows 3.x, the printer should be directly connected to the PC.
