Freecom SAF-Z80K2, Owner'S Manual

Page: 7 / 12

≈65% – Ambient humidity control at around 65%.
≈55% – Ambient humidity control at around
55%.
≈45% – Ambient humidity control at around 45%.
Restart the unit will be on previous setting.
4. SET HUMID. – Additional humidity setting
Press this button to turn the Addi5% RH humidity setting ON and OFF. When the
LED is light on, the setting of desired humidity control will plus about 5% at each
humidity setting mode. i.e. "≈65
%→
70%", "≈55%
→
60%" and
"
≈45%
→
50%"
5. AUTO SWING – AUTOMATIC OSCILLATION
When you turn on the unit by main power, the oscillation louver will Auto-swing up and
down. Press this button will stop the louver at your desired position. By pressing it again
the oscillation louver will Auto-swing up and down.
Restart the unit will be on previous setting.
WARNING:
DO NOT adjust the OSCILLATION LOUVER by hand, as this will cause
damage.
6. FULL TANK – FULL TANK INDICATOR
The indicator will flash and the alarm will sound when the water tank is full. Please
empty the water tank and replace it to the proper position, then the unit will running at
previous setting.
7. Ionizer
When you turn on the unit, the Anion generator will ON by a 30 seconds delay-time, the
unit will releases negative ions from air outlet
.
and it will simultaneously OFF while the
unit turn off.
6