Freecom Network Drive
EN
1
1.1 LED Description
SYSTEM:
SYSTEM LED is on when the system is ready
LINK:
LINK LED is on when a LAN connection is available
Capacity LED:
The Capacity LED is a power and activity display. The LED is always
on when the drive is powered and flickers during drive activity.
1. Power switch
Please turn the Freecom Network Drive off when it is not in use. This conserves electric-
ity and extends the life of the hard drive. The power switch is located on the rear of the
Freecom Network Drive.
1. Reset button
Press the „Reset“ button and power on device while pressing the „Reset“ button. Keep
„Reset“ button pressed for 15 seconds to restore factory defaults.
WARNING! Before turning off the Freecom Network Drive manually, please
make sure to first "unplug or eject hardware". This option is found in the
Windows taskbar. Failure to do so may result in the loss of data.
Capacity LED
SYSTEM / LINK
LAN
USB
Power
Reset on/off