9
GB
2
Driver Installation
C
HAPTER
3:
Driver installation
Under Windows ME / 2000 / XP a separate Freecom driver is not required. The
drivers will be installed automatically by the operating system after plugging in
the Freecom FHD-2 into the USB port of the computer.
3.1 FHD-2 USB 2.0 version
Driver installation USB under Windows 98 SE
Note: Your Freecom FHD-2 is fully backwards compatible with USB 1.1.
The installation for USB 1.1 is the same as described below for USB 2.0.
1. Insert the Freecom Manual and driver CD into the CD-ROM drive.
2. Connect your Freecom FHD-2 to the USB connector of your notebook or
computer.
3. The "Add New Hardware Wizard" opens and a "USB 2.0 Device" (USB 2.0 PCI
Host Controller) or a "USB TO IDE" (USB 1.1 connector) is found.
Click on "Next".
