20
Drive Operation
Loading a Cartridge
Note
While setting the data cartridge, do not turn off the host computer. This
may cause a malfunction or damage data.
1
Turn on the host computer. Check that the drive’s TAPE
MOTION LED, CLEANING REQUEST LED and REPLACE
TAPE LED go off.
2
Open the dust cover.
3
Set the AIT data cartridge orientation as shown here and
insert it into the data cartridge slot.
By inserting the data cartridge to the extent, it is automatically set in
the drive and the TAPE MOTION LED lights.
Unloading a Cartridge
The cartridge can be removed from the SDX-460V and SDX-260V either in
response to a ATAPI Unload Command, or by pressing the EJECT bottom.
By pressing EJECT button, the tape is rewound and the cartridge ejected
from the slot.
Summary of Contents for FC TapeWare AIT-260i
Page 1: ......
Page 15: ...15 Orientation 10 10 10 10 10 10 10 10 ...
Page 27: ......
Page 28: ...Printed in Japan ...
