FREE MOTION EPIC STRENGHT GZFI8013.3, Owner'S Manual, Page: 7 / 16

7
ADJUSTING THE CAM
2
RESISTANCE
The CAM 2 resistance can be adjusted to either a 1:1
or a 1:2 ratio to the weight stack. At a 1:1 ratio, the
resistance will be equal to the weight of the weight
stack. At a 1:2 ratio, the resistance will be equal to
one-half the weight of the weight stack.
To change the CAM 2 resistance to a 1:1 ratio, pull the
CAM 2 knob out and move the CAM 2 to the HEAVY
slot in the pivot plate. Make sure the knob fully
engages the slot.
To change the CAM 2 resistance to a 1:2 ratio, pull the
CAM 2 knob out and move the CAM 2 to the LIGHT slot
in the pivot plate. Make sure the knob fully engages
the slot.
CAM 2
Knob
Pivot
Plate
HEAVY
Slot
Spring
LIGHT
Slot
WARNING:
Always make sure that
the CAM
2
knob is fully engaged into the slot in
the pivot plate before using the leg lever.
Make sure the spring is in place and function-
ing properly.