14
Charging the Battery
6. CHARGING THE BATTERY
• The charger includes two parts: the adapter (a) and the charger pedestal (c).
• Do NOT use any other type of charger. This charger is only for use for this type
of battery.
• Please observe the specified voltage, the voltage must be the same as that
marked on the rating plate of the battery charger:100-240 V50-60 Hz
WARNING
The battery must be fully charged before your first usage. Insert the battery in
the charging pedestal and allow the battery to charge for a full five hours before you
use it for the first time. DO NOT ALLOW WATER TO COME IN CONTACT WITH THE
CHARGING UNIT.
Note: If the weeder doesn’t work when pressure is applied to the trigger, this
means the battery is not charged - return it to the charging pedestal and continue
charging.
HOW TO CHARGE THE BATTERY (fig. 6-a)
1. Check that your voltage is the same as that marked on the rating plate of the
battery charger. Insert the power plug of the adapter (a) into an electrical wall
socket. The LED (b) on the adapter will turn green.
2. Insert the battery pack into the charger pedestal (c) .The LED will turn red at
once indicating that the charger is working.
3. When fully charged, the LED will turn green.
4. Remove the battery from the charging pedestal when it is fully charged.
ATTENTION:
Please remove the battery from the charger pedestal after it is fully charged. Do
not store the battery in the charging pedestal.
figure 6-a
a
b
c
Troubleshooting & Warranties
3-prong
battery
fits the
2-prong
charger
