Fredenstein F602 Tube Compressor
User Controls:
Threshold Control:
Determines the input level at which the compressor is activated. If turned completely counter
clockwise, a switch engages and the compression is turned off.
Compression Ratio:
The amount of increase in output level relatively to the threshold level. Minimum is 2:1, maximum
is 20:1 (limiting).
Release Control:
If the signal drops below threshold, the release time determines how fast the compressor falls back
to 0 dB gain reduction. If turned completely counter clockwise, a switch engages and the release
time is set to automatic mode depending on the program material. The range is 12 ms to 5s.
Attack Control:
Determines how fast the compressor reacts to signals above threshold.
Mix
Control:
The mix control allows the user to select a ratio between the compressed and uncompressed signal.
If turned completely counter clockwise, a switch engages and only the compressed signal will be on
the output, if turned completely clockwise only the uncompressed (input) signal is present on the
output.
Level Control:
Make-up gain can be applied in the range of 0 to + 20dB to compensate for the gain reduction.
Technical Data:
Reference Level
:
0 db = +4 dBu (American Studio Standard)
Make-up Gain
:
0 to +20 dB
Threshold
:
-25 dB to +9 dB
Attack Time Range :
250 us to 15.5 ms
Release Time Range :
12 ms to 5 s
Compressions Ratio :
2:1 to 20:1
Frequency Response :
20Hz – 20,000Hz, +/- 1dB
Distortion
:
< 0.01%
S/N Ratio
:
> 90dB at 0dB gain
Input Impedance
:
> 10KOhm
Max. Input Level
:
+ 24 dBu
Output Impedance
:
20 Ohm
Max. Output Current :
+/- 200 mA
Max. Output Level
:
+ 26 dBu
Power Consumption :
+16 V +250 mA, -16V -200 mA
Fredenstein F602 Manual V1.2 Jul 18, 2014 Page 4
