DGA200 Rev160525
24
Install Optional Caster Kit
The caster kit option adds 3 3/4 inches to the height of the DryGear.
Parts Needed
1-Caster Kit
NOTE:
The caster kit includes six threaded leg plugs and six casters, two
casters have a break mechanism.
Procedure
NOTE:
The caster threaded leg plugs may be installed in the leg assemblies
at the factory.
1. Remove plastic leg plugs from leg assemblies.
2. Install threaded plugs in leg assemblies. Tap plug lightly to seat completely
into leg.
NOTE:
Two casters have a brake mechanism, these should be installed on
the front legs.
3. Screw casters into threaded plugs.
End Procedure
