OPA740 Rev1108
6
SAFETY SUMMARY
FRC lighting products are engineered and manufactured with safety in mind.
It is critical that FRC scene lights are maintained and operated correctly. Read and
understand all instructions before performing maintenance or operating.
The following safety precautions shall be observed while performing procedures
in thsi manual.
General Safety Precautions
Ensure power is off prior to connecting or disconnecting wires and plugs or
performing maintenance.
Lampheads are extremely hot when operating, do not use such that personnel or
equipment could inadvertently come in contact with the lamphead.
Operation Safety Precautions
Ensure that all lighting components are clear of obstructions when raising
telescopic poles.
Maintenance Safety Precautions
Refer to Maintenance section for procedures.
Ensure power is off prior to removing the front glass or opening covers.
Do not operate the light with the front glass removed or cover opened.
Ensure replacement bulbs have the same voltage and wattage.
When handling a new HID bulb avoid touching it except on the flat seal at either
end.
Use a clean soft cloth to wipe the reflector clean if necessary, do not use liquid
or aerosol cleaners.
