INSTALLATION AND SETUP
Please read the product setup instructions carefully. Do not operate this product in windy
conditions.
Find a flat area of either grass or gravel for your product. Do not set up your inflatable on a
slope. Doing so may prevent the inflatable from inflating properly or standing correctly. It
may also present a safety hazard. Be sure that the area is clear of leaves, loose dirt and/or
standing water as any of these can stain the product or damage the fan.
Carefully remove the inflatable and included items from the box. Set the stakes, ropes and
clips aside. You will need those after fully inflating your inflatable for the first time.
Lay your inflatable out on the ground. The fan will be on the back side of the inflatable.
Ensure that the deflation zipper on the back of the inflatable is closed. Plug the fan into a
Class A GFCI-protected receptacle to start inflating your inflatable.
For your first inflation, you will need to help your inflatable inflate properly. Ensure that
all of the extremities are positioned correctly, untwisting anything that may have become
tangled during unpacking and setup. For taller inflatables, you will want to connect the tie
downs to the upper fabric (or metal) loops before you fully inflate. Otherwise, the loops
may be too high to reach.
When fully inflated, locate all of the tie-down points around the base. Place a stake through
the loop and press the stake about 2/3 of the way into the ground (you will insert these
fully later). These stakes help hold the inflatable upright and prevent the wind from moving
your inflatable.
Note: If your inflatable is taller than 10 feet, you will need assistance to safely
position and secure your inflatable.
