11
Using a Password
You can use a password to keep the information in
your phone list private. Your password will be re-
quested whenever anyone turns on the unit and first
presses
PHONE
.
Password Warnings
Warning! After you set the password, you will not be
able to see or use your phone list without it. So always
record your password and keep it in a separate place.
If you forget your password, you must reset the unit to
access the phone list. Your reset button is located in
the tiny hole on the back of the unit. Use the sharp end
of a straightened paper clip to gently press the reset
button. If this does not reset your unit, remove your bat-
teries,
wait at least two minutes
and then reinstall them.
Warning! Resetting the unit removes your password,
but it also erases all your data, so always keep written
copies of your data.
Password Setup
1. Press
PHONE
.
2. Use
to see
Set the password
and then press
ENTER
.
3. Type a password and then press
ENTER
.
Your password can have up to 23 characters.
4. To test the password, press
ON/OFF
, type the pass-
word, and then press
ENTER
to gain access.
5. To disable the password, repeat Steps 1 and 2
above, and then press
ENTER
when
Enter pass-
word
appears.
