14
The Medical Book System platform
enables you to look up a word from one
installed book card in the other installed
book card.
This book card can send words to and
receive words from other book cards.
Some book cards are not able to trans-
fer words. To learn if a book card can
send or receive words, read its User’s
Guide.
1. Install two book cards in the
platform.
2. Select a book to read.
3. Highlight a word in that book .
You can highlight words in menus,
lists, entries, and other text. To learn
how to highlight a word in this book,
read “Highlighting Search Words.”
4. Hold and
press .
5. Highlight the icon of the other
book card and then press
.
The word that you highlighted
appears in the other book.
6. Press
again, if needed, to
search for the word in the other
book.
ENTER
ENTER
CARD
✩
Looking Up Words
in Other Books
If, due to electrostatic discharge or other
cause, the keyboard fails to respond or
the screen performs erratically, try the
steps below to reset the platform.
Perform only as many steps as required
to restore normal operation.
CAUTION Resetting the platform when
book cards are installed may erase set-
tings and information entered in those
book cards. Remove all book cards
before resetting.
1. Hold and
press twice.
If nothing happens, try Step 2.
2. Use the end of an opened paper clip
to gently press the reset button on
the back of the platform.
The reset button is recessed in a pin-
sized hole located near the book card
slots.
CAUTION Pressing the reset button
with more than light pressure may
permanently disable it.
If nothing happens, try Step 3.
3. Remove and reinstall the batteries.
To learn how, read the Medical Book
System platform’s User’s Guide.
ON/OFF
CLEAR
Resetting the Medical
Book System