Franklin MLS X-RAMP PRO Instruction Sheet Download Page 2

Assembly Instructions:
1) Remove all components from the package and confirm that you 

have all of the parts listed.
FRAME ASSEMBLY:
2) Assemble the frame according to the diagram below.  

FUNCTION:

The MLS X-Ramp has two sides designed for training.
Side 1: Curved Ramp

This side is designed to help train passing, trapping and heading by 

returning the ball in a controlled “looping” manner.
In order to achieve the looping effect, kick the ball toward the 

center of the trainer.  The ball MUST remain on the ground and 

kicked with force.  The curved design and the tension in the netting 

allow the ball to loop back to the player.

STORAGE:

To fold the unit for storage and travel, slide down the plastic guard

on the locking hinges located on both sides of the frame. Unclip the 

latch to release and fold. 

See images below.

Locking

Hinge

Note: Netting was removed to illustrate folding feature.  The netting can 

remain on the product when folding for storage. 

     

Side 2: Rebound Wall

This is designed to be used with one or multiple players. Kick the ball 

into the wall to practice “Give and go” training, one touch passing 

and trapping skills.

NET ASSEMBLY:
3) The larger netting (Part 7) attaches to the curved side of the frame.  The 

smaller netting (Part 8) attaches to the flat side of the frame.
4) For the curved side of the frame, slide the corners of the netting (Part 7) 

onto the corners of the frame. Attach the bungee cords (Part 13) to the 

grommets on the netting (Part 7) and then to the frame to secure. The net 

should be very tight.  Two people may be required to attach to the frame.
5) For the rebound side of the frame, attach the bungee cords (Part 13) to 

the grommets on the netting (Part 8) and then to the frame.
6) Weave the red ribbon through the netting as shown below to create a 

target strike zone area.
7) Use the ground stakes to secure and stabilize the item during play.  

Place the ground stakes on each of the four bottom corners of the frame. 

*Note: The ground stakes should attach to the frame only. Make sure that 

the netting is not caught in the ground stake.

                         Keep hands and fingers clear 
while pushing to fold soccer trainer.  Failure to 
observe this warning may result in loss of 
fingers or other serious injury.  Adult assembly 
and supervision recommended.

15

15

14

15

15

3 5

4 6

1 2

9 10

1112

1112

7

8

13

16

Reviews: