84
Using the Databank
3. Highlight the entry you want to
delete and press EINGABE.
4. To delete all databank entries,
highlight Erase the List in the
Databank menu and then press
EINGABE.
5. Press Y to erase all databank
entries or N to cancel the deletion.
Using a Password
You can use a password to prevent
unauthorized access to the databank.
Warning! Always write the password in
a safe, separate location. If you lose or
forget the password, you will be able to
use the databank again only by
removing the batteries from your DBD-
1660, which will permanently erase all
the information stored in the databank.
Using the Databank
1. Press and
DATA (F2).
2. Highlight Set password and then
press EINGABE.
3. Type a password of up to eight
characters and press EINGABE.
Use
to move the cursor; use
to delete.
4. Press C to confirm or CLEAR to
cancel the password.
The password you set will be
requested the first time that the
databank is used during a session.
5. To change the password, repeat
Steps 1-4.
To remove a password, press
EINGABE at the blank password
screen.
ZUR
