Installation Options: Please see the below images for installation examples.
(A) Horizontal Wall Mount
(B) Vertical Wall Mount
(C) Horizontal Wall Mount – Two Speakers Array (D) Corner Wall Mount – Three Speakers Array
(E) Pendant Mount – Four Speakers Array (Requires Array Bracket Sold Separately)
To mark the proper locations for drilling, place the multi-angle bracket against the mounting surface and choose the holes you want to use for mount-
ing. Then use a pencil to mark the hole locations on the mounting surface prior to drilling. Remove the bracket before drilling the holes, in order to avoid
damage to the bracket. After drilling the mounting holes, install the large half of the bracket firmly to the mounting surface in the desired orientation using
appropriate mounting hardware.
4)
Final Installation
To complete mounting the speaker, choose the desired orientation (vertical or horizontal) and then slide the speaker into the large half of the bracket, then
install the small half of the bracket (the endcap) using the long screws provided. Note: If the speaker does not slide easily into the bracket in the desired
orientation, rotate it 180 degrees and try again. The speaker is intended to slide into the bracket in only one direction.
CAUTION: Do not over-tighten the endcap screws. Too much torque may crack the plastic bracket. A snug fit is all that is necessary to assure proper performance.
(3)
Option
Vertical Wall Mount
Two Speakers Array
Three Speakers Array
Horizontal Wall Mount
1
Option
2
Horizontal Wall Mount
Vertical Wall Mount
Option
1
Option
2
Option
3
Two Speakers Array
Three Speakers Array
Step 2a: Install speaker
Step 2b: Install endcap
Step 1: Install the multi-angle bracket
Step 2: Install the speaker