4
The BOOKMAN 440 model uses two
CR-2032 lithium batteries. Here is how
to install or replace them.
Warning:
When the batteries lose
power or are removed from BOOK-
MAN, information that you have entered
in its built-in book as well as in any in-
stalled book card will be erased.
1. Turn BOOKMAN over.
2. Slide off its battery cover in
the direction of the triangle.
3. Install the batteries following
the diagram in the case
4. Replace the battery cover.
Warning:
Never install or remove a book
card when your BOOKMAN is on. If you
do, information that you entered in its built-
in book as well as in the book card will be
erased.
1. Turn BOOKMAN off.
2. Turn BOOKMAN over.
3. Align the tabs of the book
card with the notches in the
slot.
4. Press the book card down
until it snaps into place.
Installing Book Cards
Installing Batteries
➤
Removing Cards
Warning:
When you remove a
BOOKMAN card to install another,
information that you entered in the
removed card is erased.
➤
Resuming Where You Left Off
You can turn off BOOKMAN at any
time. When you turn BOOKMAN on
again, the screen that you last
viewed appears.
