32
Sending Words
This BOOKMAN dictionary can send
words to and receive words from certain
other BOOKMAN books.
To send a word, you must first install a
book card in your BOOKMAN, and that
book card must be able to send or re-
ceive words. To learn if a book card can
send or receive words, read its User’s
Guide.
1. Highlight a word in this book.
See “Highlighting Words” in this
User’s Guide.
2. Hold
✩
and press
KARTE
.
3. Highlight the other book.
4. Press
EINGABE
.
The other book may automatically
enter your word. However, if your
word stops at the initial screen of
the receiving book, simply press
EINGABE
to look it up.
Resetting BOOKMAN
If the BOOKMAN keyboard fails to
respond, or if its screen performs
erratically, first press
CLEAR
and then
press
AN/AUS
twice. If nothing happens,
follow the steps below to reset it.
Warning:
Pressing the reset button with
more than very light pressure may perma-
nently disable your BOOKMAN. In addi-
tion, resetting BOOKMAN erases settings
and information entered into its built-in
book, and in an installed book card.
1. Hold
CLEAR
and press
AN/AUS
.
If nothing happens, try Step 2.
2. Use a paper clip to
gently
press
BOOKMAN’s reset button.
The reset button is recessed in a pin-
sized hole on the back of BOOKMAN.
Look for it on the battery cover or near
the book card slot.
➤
Troubleshooting BOOKMAN
• Make sure your book card, if any,
is installed correctly.
• Check that the book card’s metal
contacts are dirt-and dust-free.
