background image

Page 2

For technical questions, please call 1-888-866-5797.

Item 70027 

        

Specifications

Loading Capacity

45°- 500 lb.
Vertical - 800 lb.
Horizontal - 1000 lb.

IMPORTANT SAFETY INFORMATION

Assembly Precautions

1.  Assemble only according to these instructions.  

Improper assembly can create hazards.

2.  Wear ANSI-approved safety goggles and 

heavy-duty work gloves during assembly.

3.  Keep assembly area clean and well lit.

4.  Keep bystanders out of the area during assembly.

5.  Do not assemble when tired or when under the 

influence of alcohol, drugs or medication.

6.  Weight capacity and other product capabilities apply 

to properly and completely assembled product only.

Use Precautions

1.  This product is not a toy.  Do not allow 

children to play with or near this item.

2.  Use as intended only.

3.  Inspect before every use; do not use 

if parts are loose or damaged.

4.  Lock into one of the four operating 

postions before use.

5.  Do not exceed listed weight capacity.   

Be aware of dynamic loading!

  

Sudden load movement may briefly create 
excess load causing product failure.  

6.  Strap top-heavy loads to hand truck in vertical 

position and hold them at all times.

7.  Load must be centered over the wheels at all 

times during movement.  If a load’s center of 
gravity is too far away from the edge, it may not 
be possible to move it safely using a hand truck.

8.  Use only on flat, level surface able to 

support weight of hand truck and load.

9.  Maintain product labels and nameplates.  

These carry important safety information.  
If unreadable or missing, contact 
Harbor Freight Tools for a replacement.

Summary of Contents for 70027









Reviews: