Page 3
For technical questions, please call 1-888-866-5797.
Item 58319
Assembly Instructions
Read the ENTIRE IMPORTANT SAFETY INFORMATION section at the beginning of this document
including all text under subheadings therein before set up or use of this product.
1. Position the Handle in the middle of the wooden
dolly (not included), as shown in Figure A.
2. Use a small diameter drill bit (smaller than
the screws) to drill four pilot holes.
3. Use a Philips Head screwdriver to thread
the screw through the Handle and into
the wooden dolly (not included).
4.
Using the installed handle, mark the
spot for the Holding Bracket.
5. Drill pilot holes and screw the Bracket into the
wooden dolly to secure it.
Figure A
Adjusting Handle Length
1. Remove the Adjusting Bolts, as shown in Figure
B, and move handle to desired length.
2. Insert the same bolts back into the handle.
3. Tighten bolts using a wrench.
Figure B
Parts List and Diagram
Part
Description
Qty
1
Wood Screws, 1″
4
2
Swivel Handle
1
3
Holding Bracket
1
4
Screws for Holding Bracket
2
Record Serial Number Here:
Note:
If product has no serial number, record
month and year of purchase instead.
Note:
Some parts are listed and shown
for illustration purposes only, and are not
available individually as replacement parts.
Specify UPC 193175437303 when ordering parts.
Mounting
Screws (1)
Adjusting Bolts
Holding
Bracket (3)
