Extreme Sonic Cleaner Instruction Manual
WARNING:
IMPORTANT SAFETY INFORMATION
IMPORTANT:
877.509.9160 • FAX 573.446.6606 • www.BTIbrands.com
1. For best results we recommend the use of Frankford Arsenal
EZ Sonic Brass Cleaning Solution or
EZ Sonic Parts Cleaning Solution
2. Do not operate the cleaner without water and/or
cleaning solution in the tank.
3. Do not place cases or other products directly in the tank.
ALWAYS use the basket.
4. Do not clean aluminum parts with this cleaner since there is
a good chance it will damage thin/ low grade aluminum parts.
5. To prolong the life of the unit, we recommended after every
3 working cycles to let the unit cool for 15 minutes
6. Always wipe the tank out with a damp cloth and dry
with a clean towel between uses.
7. Do not mix steel cases and brass cases in the cleaner at one time.
1. To avoid electrical hazard, make sure the cleaner remains
unplugged while filling or emptying the tank.
2. Do not overfill tank.
3. Do not place hands in the tank while the cleaner is running.
4. Keep unit away from all direct heat sources.
Specifications Extreme Sonic Cleaner
• Cleans approximately 350 pieces of .223 brass per batch
• Heating function for enhanced cleaning power
• Digital display and time controls
• Tank Size: 7.7” x 6.5” x 2.6”
• Capacity 2L
• 100 watts
• 42KHz
Change cleaning solution when the water/solution mixture
becomes visibly dirty or you notice the brass is not coming
out as clean as previous cycles.
When you have finished cleaning your brass, unplug the
unit; drain your unit of the cleaning solution. Rinse the
basket with water, wipe down the tank with a clean damp
cloth, then dry the unit and basket with a clean dry cloth
before storing.
Maintenance
Ultrasonic Brass
Cleaning Solution
#878787 -- 32oz. bottle
Ultrasonic Parts
Cleaning Solution
#898989 -- 32oz. bottle
120v -- #868686
220v -- #888850
877.509.9160 • FAX 573.446.6606 • www.BTIbrands.com
The Frankford Arsenal EZ Sonic Extreme Cleaner is designed to
deliver state of the art cleaning power for brass as well as other parts.
The high frequency ultrasonic agitation cleans brass thoroughly
inside and out quickly, quietly and without mess. It even breaks down
the stubborn carbon build up in primer pockets. It also includes a
removable basket for convenient draining.
The Extreme Sonic Cleaner provides added cleaning power with its
heating function. It also provides increased capacity and high-wattage
ultrasonic power for processing large batches of brass or parts. Two
specialized cleaning solutions are available: one designed specifically
for brass and the other for miscellaneous parts such as pistol barrels,
gas pistons, trigger groups, etc...
Extreme Sonic Cleaner Instruction Manual
Heating Function
To turn on the heating function press the HEATING button once. To turn off the heating function press the HEATING
button again. The heating function can be run alone to preheat the water and/or solution or at the same time as the
cleaning function.
The water and/or solution will heat to a fixed temperature of approximately 65oC /149oF.
NOTE: The heater function will deactivate once maximum water temperature is reached. The heater button will become
functional again once the water temperature drops a few degrees. It the heating button does not illuminate when pressed,
this simply means that the water in the tank is hot enough for your cleaning cycle. Try it again before the following
cleaning cycle.
