MAINTENANCE
5
1
With normal use, maintenance should not be necessary. Should there
be an extended period where the dispenser is not used, it is possible the
soap/lotion could harden and prevent proper discharge. In this event,
submerge the entire Dispensing Head with Pump into hot water for
several minutes. Next pump hot water through the assembly. Repeat as
necessary to remove the obstruction.
2
To clean the dispenser, use a soft cloth or sponge with soap and water
only. Do not use any abrasive cleaners or pads. Dry with a cloth or paper
towel.
2
1
Replacement Parts
3
1 - SD2401 Pump
2 - SD2402 Bottle
3 - SD2403 Fill Tube
3
