background image

Franke Kindred Canada Limited | 1000 Franke Kindred Road | Midland | Ontario | Canada | L4R 4K9 
CANADA: T 1-855-446-5663 | F 1-866-227-3050 |  [email protected] 
USA: T 1-855-526-0503 | F 1-866-440-2250 | [email protected] 

HHF49GZMI | 

06/20

Hands Free Faucet HHF49G

Installation and Operating Instructions

1. Safety First

These instructions relate to the use of the 

Franke Hands Free 

Faucets 

only, any external or ‘add-on’ parts will be supplied with 

separate instructions.

Appropriate personal protective equipment must be worn when 

installing, calibrating and commissioning this product.

It is recommended that the electrical part of the installation be 

carried out by a qualified electrician in accordance with the latest 

electrical regulations. It is also recommended that any plumbing is 

carried out by a qualified plumber.

If the faucet is used by individuals (including children) with reduced 

physical, sensory or mental capabilities, or lack of experience and 

knowledge, they must be given adequate supervision or instruction 

concerning use of the faucet by a person responsible for their 

safety. Children should be supervised to ensure that they do not 

play with the faucet.

IMPORTANT: Please read these instructions 

carefully and follow each stage in order!

2. Faucet Parts Diagram

Summary of Contents for HHF49G









Reviews: