background image

3

HHF23TZMI | 

05/20

Head Office

Franke Kindred Canada Limited 

1000 Franke Kindred Road 

Midland, ON  L4R 4K9  

Canada

www.franke-commercial.com

IN CANADA:

email: [email protected] 

telephone: 1-855-446-5663 

IN USA:

 

email: [email protected] 

telephone: 1-855-526-0503

4. Troubleshooting

5. General Cleaning

Use only soap, water and a soft cloth for cleaning.  Clean sensor lens with non-abrasive materials only. 

Cleaning the Solenoid Valve

Warranty & Support

Warranty

The faucet has a one year warranty, however it is expected that the faucet will operate efficiently for many years.

Support

For technical support please visit our technical pages on our website at www.franke-commercial.com or contact us directly. Our customer 

service team will be pleased to help you.

DESCRIPTION

CAUSE

RESOLUTION

No water out

Battery is dead

Change the battery

Water supply cut off

Check supply lines

Dirt in the filter

Clean the filter

Water pressure too low

Increase water pressure

Water will not turn off

Dirt on the sensor window

Clean the sensor

Too little water flow

Water supply is turned down

Adjust water supply

Filter is dirty

Clean the filter

Water pressure is too low

Raise the pressure

Too much water flow

Water pressure is too high

Adjust pressure

The indicator light is not on

Battery is dead

Change the battery

Poor connection of battery or power supply Change batteries

Summary of Contents for HHF23T







Reviews: