7 Quick wash button
This option can be used for lightly soiled items in order
to obtain a good washing program in a short time. The
washing time will be reduced according to the type of
fabric and the selected temperature.
8 Super rinse button
This option can be selected with all programmes,
except the wool/handwash programme
. The
machine will add some rinses to the selected
program.
This option is recommended for people who are
allergic to detergents and in areas where the water is
very soft.
9 Night Cycle button
When you choose this option, the machine will not
drain the water of the last rinse, so as not to wrinkle
the laundry.
As all spinning phases are suppressed, this washing
cycle is very noiseless and it can be selectionned at
night or in times with a more economical power rate.
On cotton and synthetic programmes the rinses will
be performed with more water.
To empty out the water of the last rinse follow the
instruction in chapter
Rinse Hold Button.
10 Delay Start button
The wash programme can be delayed from 30 min –
60 min – 90 min, 2 hours and then by 1 hour up to a
maximum of 23 hours by means of this button.
Selecting the delayed start
• Select the programme and the required options.
• Select the delay start.
• Depress START/PAUSE button: the machine starts
its hourly countdown.
The programme will start after the selected delay
has expired.
Cancelling the delayed start
• Depress START/PAUSE button.
• Depress DELAY START button until the symbol
00
’
is displayed.
• Depress START/PAUSE button again.
This option cannot be selected with
Drain
programme.
Important!
The door will be locked throughout the delay time.
If you need to open the door, you must first set the
washing machine to Pause by pressing the
START/PAUSE button. After you have closed the
door, press the START/PAUSE button again.
11 Display
The display shows the following information:
Cancelling – Duration of the programme –
Delayed start – Incorrect option selection –
Alarm code – End of programme.
If a programme has been cancelled – programme
selector dial on position
Off
– all the lights are off
and three flashing dashes will be displayed.
After selecting a programme, the duration is
displayed in hours and minutes (for example 2.05).
The duration is calculated automatically on the basis
of the maximum recommended load for each type of
fabric.
After the programme has started, the time remaining
is updated every minute.
2.05
Duration of the selected programme
---
Cancelling
10
132970760 GB.qxd 05/06/2007 11.17 Pagina 10