Franke FVAS A80 BK, User Manual

Page: 13 / 168

E Short Delay Function
Activates/Deactivates the Delay function (automatic shutdown of the
Motor and of the lighting delayed by 30').
Cannot be activated with Intensive or 24h function.
Deactivate the function by pressing the same key or press the A key
for about 1 second to shut down the motor.
LED A remains lit (fixed)
and LED E lights up.
The display shows an
animation.
Long press with
light or motor on
24h Function
Activates/Deactivates the motor in the 24h Air Exchange mode, a
speed that allows suction of 10 minutes every hour, for a 24-hour
cycle.
LED A remains lit (fixed)
and LED E flashes. The
display shows an anim-
ation.
Long press with
all loads off (mo-
tor and lights)
Connected Mode Decoupling
The procedure for deleting all devices compatible with the Connected
Mode previously associated with the Connected Mode Coupling func-
tion starts.
Upon successful com-
pletion of the procedure
all the LEDs flash 5
times.
F Short Wi-Fi connection
Activates/Deactivates the Wi-Fi Connection function.
Note: the Wi-Fi function is automatically activated when the user re-
quests the Wi-Fi configuration procedure.
Flashing:
connection to domestic
network in progress.
Fixed:
Wi-Fi connection activ-
ated
Long press with
all loads off (mo-
tor and lights)
Wi-Fi configuration
Activates/Deactivates the Wi-Fi set-up procedure.
Before starting the procedure, use the Franke@Home App to re-
gister with the Franke IOT system. Then follow the instructions to add
a new device and register the domestic router.
If the procedure is not successfully completed within a few minutes,
deactivate it by long pressing the key again, then make another at-
tempt. The hood will nonetheless abandon the procedure if it is not
successfully completed within 10 minutes.
The display shows an
animation:
configuration procedure
in progress.
Upon confirmation that
the procedure was suc-
cessful, all the LEDs will
light up for 2 seconds.
G Short AUTO Mode
Activates/Deactivates the Automatic operating mode.
AUTO mode is deactivated whenever any other keys are pressed.
Cannot be activated with Intensive, Delay or 24h on.
Thanks to the presence of the Air Quality Sensor , an algorithm is
able to modulate the speeds based on the quality level of the intake
air.
WARNING: The algorithm function is optimised for the most common
types of cooking. Uncommon preparations may produce a non-optim-
ised response.
Fixed:
AUTO mode activated.
Off:
AUTO mode temporarily
deactivated.
Long press with
all loads off (mo-
tor and lights)
Activates/Deactivates the Activated Carbon Filters alarm. With the motor off, the
display shows F + 2
alarm activated.
With the motor off, the
display shows F + 0
alarm deactivated.
Recommended device coupling sequence:
1 - Connected Mode (See remote control manual)
2 - Connected Mode Coupling (See hood manual)
3 - Remote Control-Hood Coupling (See remote control manual)
5. FRANKE@HOME APP
The Franke@Home App is available for
iOS and Android smartphones and al-
lows remote access to all hood func-
tions.
13