EN
1
12
• Pass the cables through the slots in the threaded pawls (
a
)
and screw the cable locking screws (
b
) to the pawls them-
selves.
• When the operation has been
completed the result must be as
shown in the figure for all 4 ca-
bles.
• At this point we have all 4 cables con-
nected to the plate
Bring the cables under tension by push-
ing them upwards so that they slide in-
side the cable clamp screw and slide out
of the slot in the threaded pawl.
This is possible because the cable clamp
screw has a system that, if mounted
properly, allows the cables to slide in-
side it in one direction only, and pre-
vents it from sliding in the other direc-
tion.
Attention, the cables all have the same
length to facilitate the operation of the
final level. The front left cable must not
be slacker than the others.
Summary of Contents for FUD 5007 I XS
